Rhino-Rack Paddle

Frequently Asked Questions

• How do Rhino-Rack Crossbar Pads w/ Tie-Downs (RRRWP04) protect my SUP or kayak during roof transport?

  RRRWP04 uses EVA foam wrapped in UV‑resistant polyester canvas to cushion boards against metal crossbars and help prevent scratches to both board and vehicle. The pads wrap around standard bars with hook‑and‑loop fasteners and include rubber‑coated cam‑buckle tie‑downs to secure loads while minimizing buckle contact with the hull; when tightened correctly they also reduce noise and vibration.
• Will the Crossbar Pads (RRRWP04) fit my roof rack crossbars like Vortex, overhang, or flush bars?

  Yes, the RRRWP04 pads are designed for universal fit and wrap onto most standard crossbars (Vortex, overhang, and many flush bars) using hook‑and‑loop straps. They measure 27.5 inches long by about 2 inches high from the top of the bar, so verify that length against your bar spacing and add front/rear tie‑downs (for example RRRBAS) for excessively long boards.
• How does the Rhino‑Rack Universal Side Loader compare to using Crossbar Pads (RRRWP04) for loading long SUPs or surfboards?

  The Universal Side Loader is engineered to make lifting and sliding heavy or long gear onto roof racks easier by providing a low‑angle loading surface and improved leverage, which reduces the physical lift compared with loading over the roof edge. Crossbar pads like RRRWP04 focus on hull protection and secure tie‑downs once the board is on the rack; many users pair a side loader for loading convenience with pads and straps for final protection and security.
• Are Rhino‑Rack Paddleboard/SUP Tie‑Down Straps with Anchor enough for long boards, or do I need additional straps like RRRBAS?

  The cam‑buckle SUP tie‑down strap with anchor secures the board to the crossbars and anchors and is usually sufficient for normal board lengths, but very long boards should always be secured with additional front/rear tie‑downs such as the RRRBAS to prevent fore/aft movement. Also use the rubber‑coated cam buckles and twist straps as needed to minimize vibration and protect the board’s finish.